Intelligent lighting module is the control of building lighting electronic control centralized operation, the lighting control part of the building to achieve timing, automatic, humanized intelligent control, so that the entire building electronic control concentrated in the control room operation, used in building lighting, hotel lighting, school lighting, hospital lighting, subway lighting and so on.
Peculiarity
1.6 Loop output control, each passing current 16A, independent operation of each loop function switch.
2. The terminal interface is connected with 2.5² lines, straight out and straight in, without turning or turning the lines.
Intelligent lighting module
3. Use plug terminals for communication and power ports.
4. The CPU chip of intelligent lighting module is imported from abroad.
5. There are 6 manual buttons on the panel of the intelligent lighting module to manually operate the loop function
6. The cable size of the module installation is the same as that of the six Chint 1P leakage switches, and the cable size of the nodes is the same.
7. The intelligent lighting module has a built-in Y-BUS interface, and CAN communication mode is used for module communication.
Function configuration
Working voltage :AC 12V(AC and DC)
Load capacity :≤16A per channel
Operating temperature :-45ºC~70ºC
Power failure maintenance :>10 years
Power loss :≤1.2W
Control loop :6 loop contact 16A
Fire function: Fire 1 road, usually open point.
Working mode
Manual operation: Intelligent lighting module panel design 6 keys, manually press the light on and off.
Automatic operation: The black button on the panel is a manual automatic switch button. After the program is set by the system, press the black button to complete the automatic operation.
Panel operation: Multiple intelligent lighting modules use panel control. After the module station number is set on the panel, there are 32 scene modes for operation.
System operation: The intelligent lighting module in the building is connected to the terminal in series and operated by the Yili lighting system.
Application effect
1. Time control of intelligent lighting module
The intelligent lighting module sets the time of turning on and off the light in the system, and automatically turns on and off the light after reaching the set time. The time control control is accurate in the system to set different time of turning on and off the light for each loop, and the time setting range is accurate to the unit of second.
2. Automatic control of intelligent lighting module
Select automatic control must be on the intelligent lighting module or system check the automatic function, after the time control control is set, check the automatic control function, automatically turn on and off the light at the set time, automatic cycle every day, in the festival can choose a day without cycle, cancel the festival automatic turn on and off the light function.
3. Fire protection function
When there is a fire in the electronic control of the building, the fire protection function will sense the fire through the fire protection sensor, and automatically turn off the power supply to prevent the wire from catching fire.
4. Intelligent lighting module in the system control
The communication interface of all intelligent lighting modules in the building must be connected to the system terminal with twisted pair shielded wire, the terminal installation lighting system, the entire building lighting system is completed, the terminal installation control room, in the control room control of the entire building has been installed intelligent lighting module electrical control department.
Module mounting dimension
1, lighting box installation :4, 6, 8, 10, 12, 18, 24 bits
2, the complete set of box installation size :108*92*45 or 1P leakage switch 6 size installation position standard
3, rail type: like leakage circuit breaker, installed on the rail
Matters needing attention
(1) When the lighting control box is on fire during work, the power must be turned off, and the intelligent lighting module must be removed to detect whether the electric box is damaged.
(2) The module must switch the 50A relay module when the passing current reaches 16A.
(3) Wiring and installation should refer to YL-MR0616A intelligent lighting module instruction manual wiring.
Q/A:
1.How could I get a sample?
---We can send to you samples if you are willing to pay the sample cost and express fee,and the sample cost will be returned to you after you palce the orders.
2.How long can I get the samples?
---you can receive our samples within 10days after you pay.
3.How to guarantee the quality of your products?
---We have established strict and standard QA systems during production.
--- We have a strict sampling system for products before shipment and ensure that the product packaging is intact and undamaged.
Audited Supplier 
){kind=link}
){kind=link}